RIBCRAFT Tow in Surfing
We love to see customers out enjoying their boat. This family seems to be having a lot of fun while using it as a tow in vehicle for surfing. Check out these photos posted by a RIB enthusiast.
« July 2009 | Main | September 2009 »
August 27, 2009
August 20, 2009
Preparing your RIB for a Hurricane
With hurricane season underway we have started to receive questions on the best way to prepare a RIB for a storm. So, I decided to poll my colleagues about this and the overwhelming response by folks here is that it's best to haul it out of the water and store it on the trailer for the duration of the storm.
Too many times I have seen boats damaged as a result of being left in the water during a storm. Even if your boat has been secured properly at a mooring, other boats which have broken free are a threat along with debris in the water. Leaving your RIB at a dock during a storm poses an even bigger danger to your vessel’s safety. One of my main concerns with this is that it’s very hard to judge how large the storm surge will be, and if your RIB is not at a floating dock, it’s sort of a guessing game as to the appropriate amount of line to let out. The other concern is the hours of chaffing between the tube and the dock caused by the high winds, turbulent water and possible tension of the lines. Another reason for not keeping the boat in the water is battery strength and bilge pumps. You need to keep in mind that the pumps may be running for many hours, particularly with slow moving storms. With the amount of rain dumped during a hurricane and their duration, a bilge pump is all but certain to fail.
Once the boat is hauled, if you are not able to store your RIB in a secure building, it should be treated much like a small airplane. The tubes should be deflated and lashed securely to the hull and trailer. Many marinas and boat owners have found that it is extremely helpful to secure a strap with screw anchors to the boat or trailer, then screw the anchors into the ground. Drilling the anchors into concrete is provides the most security, however if this is not possible you may sink them into the soil as well. If straps are not accessible, you may want to consider lashing the trailer to a secure object such as a lamp post.
I wish the best to everyone for a safe and uneventful hurricane season.
August 13, 2009
30 Years and Going Strong
This week a 1979 RIB came into our shop for some engine work. She still has the original Hypalon tube, which is holding air and looks great! Seeing a 30 year old tube in this condition is a testament to the durability and longevity of Hypalon and is exactly why we use it for all of our tubes.
August 07, 2009
Properly Mooring Your RIB
I have previously posted some tips on mooring your RIB without damaging the tube. Since a few years have gone by and there are undoubtedly new RIB owners out there, I thought it may be helpful to post a link to this entry.
August 03, 2009
Another Safety Reminder
Our local paper had another stark reminder of the importance of wearing your safety lanyard (along with not drinking and boating). A local woman was reported to have been drinking and wake jumping near other boats in the harbor. She and her passenger were thrown from the boat, while it continued on and was launched into the air, landing in a resident’s backyard.
It goes without saying that drinking and boating do not mix, however not all boaters wear their lanyard every time they operate a boat. Here’s a link to a previous post I did on the importance of wearing your kill switch lanyard.
I am a fan of a new wireless lanyard called AutoTether. It allows free movement around the boat and yet will still kill the engine if the operator falls overboard.
No matter which type of lanyard you prefer, just remember to wear it for your safety and the safety of others out on the water.
